Industrial Sectional Doors

Industrial Sectional Doors

Industrial Sectional Doors are available in widths up to 10m and in height up to 9.5m. Any lift system is available, which means we can design the tracks to fit your building height. To maximise the usage of space within your building. Operators are fitted to the shaft.

Industrial Sectional Doors

Industrial Sectional Door ISD01

ISD01 - Sectional Door

Width up to 8m
Height up to 8m

Advantages: sturdy panels, safety features, ease of installation, panels with thermal break, perimeter sealing.

Torsion spring mechanism: painted springs designed for minimum 25000 cycles operation.

Industrial Sectional Door ISD02

ISD02 - Panoramic Door

Width up to 5.9m
Height up to 6m

Advantages: maximum internal and external visibility; modern design; corrosion resistant; possibility to mix full vision and sandwich panels.

Torsion spring mechanism: painted springs designed for minimum 25000 cycles operation.

Industrial Sectional Door ISD03

ISD03 - Aluminium Door

Width up to 10m
Height up to 9.5m

Advantages: aluminium panels, stainless steel door components, doors are reinforced inside with a horizontal aluminium strut for resistance to wind load.

Torsion spring mechanism: painted springs designed for minimum 25000 cycles operation.

Industrial Sectional Door ISD01-SLP

ISD01 SLP - Lightweight

Width up to 10m
Height up to 6m

Advantages: extra wide door, save installation cost and time, single sheet panels with aluminium profiles, vertical and horizontal reinforcements for better wind load resistance. Single sheet panels material can be chosen between 0.4mm steel and 0.6mm aluminium.

Torsion spring mechanism: painted springs designed for minimum 25000 cycles operation.

Industrial Sectional Door ThermalPRO

ISD ThermalPRO

Width up to 6m
Height up to 5m

Advantages: 80 mm steel panels, thermal break top and bottom aluminium profile, heating perimeter aluminium profiles and heating cable (optional).

Torsion spring mechanism: painted springs designed for minimum 25000 cycles operation.

General Specifications of Industrial Sectional Doors

R-value (ISD01, ISD03), m²·ºC/W* – 1.13
R-value (ISD ThermalPro), m²·ºC/W* – 2.3
R-value (ISD ThermalPro with heating perimeter), m²·ºC/W* – 3.3
Thermal conductivity (ISD01, ISD03), W/m²·ºC (DIN4108) – 0.88
Thermal conductivity (ISD ThermalPro), W/m²·ºC (DIN4108) – 0.43
Thermal conductivity (ISD ThermalPro with heating perimeter), W/m²·ºC (DIN4108) – 0.3
Wind load – 2 class (EN12424:2000)
Airtightness – 4 class (EN12426:2000)
Watertightness – 3 class (EN12425:2000)
Acoustic insulation, dB – <35
Necessary lifting force, kg – to 22.5
Door panel weight (ISD01), kg/m2 – 10.9
Door panel weight (ISD03), kg/m2 – 8.8
Door panel weight (ISD ThermalPro), kg/m2 – 16.3
Panel thickness (ISD01, ISD03), mm – 40
Panel thickness (ISD ThermalPro), mm – 80
Thickness of steel (ISD01), mm – 0.4
Thickness of aluminium (aluminium panel ISD03), mm – 0.4
Thickness of steel (ISD ThermalPro), mm – 0.4

*Based off a 4x4m door

Opening Clearances for Industrial Sectional Doors

Measurements

W – width of opening (distance from left side of opening to right side).

H – height of opening (distance from floor to top of opening).

h – lintel space available (distance from top of opening to the building height). Minimum of 0.5m.

D – depth of room (distance from front to back wall). Minimum required is approximately H + 600 for Standard Lift (the minimum of lintel space of 0.5m).

b1 & b2 – distance from edge of opening to side wall. Minimum of 0.13m one side and 0.3m for side with operator.